Lighting

PlanogramBuilder comes with a predefined lighting that should be fine for most projects. It is however possible to modify the lighting.

Below are examples of two different lighting settings:

image      image

                   Standard lighting                                               Custom lighting

Lighting Intensity

  1. Open the Display menu or the Context menu > Display.
  2. Select Lighting Intensity.

image

  1. To increase and decrease the light intensity, move your mouse up and down with the left button pressed.
  2. Release your mouse button once you are happy with the light level.

 

Note: The new lighting intensity is saved as a user preference. It is applied to all existing and new projects.

Tip: While the tool is active, you can click on the viewing area to reset the default value.

Lighting Direction

  1. Open the Display menu or the Context menu > Display.
  2. Select Lighting Direction.

image

  1. To change the angle of the lighting, move the mouse around with the left button pressed. Release your mouse button once you are happy with the light orientation..
  2. Release your mouse button once you are happy with the light direction.

 

Note: The new lighting direction is saved as a user preference. It is applied to all existing and new projects.

Tip: While the tool is active, you can click on the viewing area to reset the default value.




PlanogramBuilder User Guide - © Copyright zVisuel, 2001-2022